● Remove the camshaft ①, cam sprocket ② and C-ring ③
CAUTION
Do not drop the camshaft drive chain, key and
sprocket into the crankcase.
CAMSHAFT HOLDER
● Take off the rocker arm spring ⑤ from the dowel
pin ④.
● Remove the dowel pin with the long-nose pliers.
● Install the bolt by the rocker arm shaft and pull
out the rocker arm shaft.
● Remove the rocker arm and spring
● Remove the rocker arm shaft by the same man-
ner at the opposite side.
ENGINE 3-8
①
③
②
⑤
④