VALVE CLEARANCE
● After tightening the camshaft holder lock nuts,
check and adjust the valve clearance.
Valve clearance specifications
IN and EX. valve clearance
CAUTION
Valve clearance is to be checked when the
engine is cold.
Both the intake and exhaust valves must be
checked and adjusted when the piston is at Top-
Dead-Center(TDC) of the compression stroke.
CYLINDER HEAD COVER
● Clean off oil from the surfaces of cylinder head
and cover.
● Fit the packing ② to the cylinder head cover ①.
● Tighten the cylinder head cover bolts with the
hexagon wrench.
Cylinder head cover : 12~16 N∙m (1.2~1.6 kg∙m)
LEFT ENGINE DISASSEMBLY
● Remove the magneto rotor and key.
Rotor remover : 09930-30162
0.08~0.13 mm
②
①
ENGINE 3-26