HYOSUNG RX 125 Service Manual page 130

OIL SEAL
Install the oil seal to the outer tube by using the
special tool as shown.
Fork oil seal installer : 09940-50112
FORK OIL
● For the fork oil, be sure to use a front fork oil
whose viscosity rating meets specifications
below.
Fork oil type
Fork oil capacity
● Hold the front fork vertical and adjust the fork oil
level with the special too.
CAUTION
When adjusting oil level, remove the fork spring
and compress the inner tube fully.
Front fork level gauge : 09943-74111
Front fork oil level
STOPPER RING
● To install a new stopper ring, it will be necessary
to push the spring seat inward.
CAUTION
∙Always use a new stopper ring.
∙After installing a stopper ring, always insure
that it is completely seated in its groove and
securely fitted.
SS8 Oil
Each leg 443±2.5 cc
At outer tube 146 mm
(Without Spring)
CHASSIS 6-18