Brake Pad Replacement - HYOSUNG RX 125 Service Manual

6-7 CHASSIS

BRAKE PAD REPLACEMENT

● Remove the caliper mounting bolts and take off
the caliper.
CAUTION
Do not operate the brake lever while dismount-
ing the caliper.
● Push the piston and caliper holder all the way to
the caliper when removing the pad.
● Loosen the screw and take off the housing
cover.
● Remove the pad.
CAUTION
Replace the brake pad with a set, otherwise
braking performance will be adversely affected.
● Apply the silicone grease to the caliper holder.
Silicone gerase.
● Push in the piston and piston holder all the way
to the caliper when remounting the caliper.
● Tighten the caliper mounting bolts with specified
torque.
Caliper mounting bolts : 18~28 N∙m
(1.8~2.8 kg∙m)