Air Cleaner Element - HYOSUNG RX 125 Service Manual

Cylinder head nut (12mm) : 25~29 N∙m
Cylinder base nut (10mm) : 6~8 N∙m
● When installing cylinder head cover, the rubber
packing is reached the mating surface of cylin
der head cover.
CYLINDER NUTS
● Tighten the two 10 mm nuts ③ to the specified
torque.
Cylinder base nut (10mm) : 6~8 N∙m
EXHAUST PIPE NUTS AND MUFFLER CLAMP
BOLT
● Tighten the exhaust pipe nuts ④ and muffler
clamp bolt ⑤ to the specified torque.
Exhaust pipe nuts : 18~22 N∙m (1.8~2.2 kg∙m)
Muffler clamp bolt : 9~16 N∙m (0.9~1.6 kg∙m)

AIR CLEANER ELEMENT

NOTE:
Clean Every 3,000 km,
Replace Every 12,000 km.
If the air cleaner is clogged with dust, intake
resistance will be increased resulting with
decrease in power output and increasing fuel
consumption.
Check and clean the element in the following
manner.
● Remove the upside frame cover.
● Remove the screw and take out the cover.
● Separate the element from the element cover.
(2.5~2.9 kg∙m)
(0.6~0.8 kg∙m)
(0.6~0.8 kg∙m)
PERIODIC MAINTENANCE 2-4
②
③
④