Zaxcom Nomad User Manual page 73

Zaxcom Nomad User's Manual_____________________________________________________Chapter 8
BUG NOTE mirroring does not turn on if there is no valid mirror card at boot up and it does not turn on until the mirror card is mounted
===================================================================================================================
V2.49B 2011-12-05
Added extra IFB menus to ADVANCED menu
Added IFB enable page
Changed input config must be 8 or higher for IFB page to work
===================================================================================================================
V2.46 2011-11-17
Added option to remember mirror mode after power cycle (if a card is inserted during boot)
===================================================================================================================
V2.45 2011-11-17
Changed Playback page now has meter (all disk meters combined) and track time
===================================================================================================================
V2.44 2011-11-16
Changed playback page has segment position indicator and scrub control
===================================================================================================================
V2.43 2011-11-15
Changed smoothed trim compensation for both types of input boards
Added Playback control menu to Main Menu
===================================================================================================================
V2.42 2011-11-15
Fixed jam date to user-bits again.
Fixed user-bits not remembering after a power down
Added stored REC_RUN timecode in memory for power cycle
Changed digital and analog trim handler to be smoother
Fixed problem with inverting phase on an input channel
Fixed made PLAY page come up only when play mode is triggered
===================================================================================================================
V2.41 2011-11-14
Changed no longer allow compressor ratio setting to go down to 1.0
Fixed user-bits ordering (mmddyy00 was ddmmyy00)
Added primitive Playback page (triggered on any press of PLAY button)
===================================================================================================================
V2.40 2011-11-14
Fixed INPUT CONFIGURATION text
Fixed EXT vs INT battery warning problem
Changed smoothed digital gain trim to avoid zipper sounds when changing digital trim
BUG NOTE outputs cannot be assigned to any disk track yet (all software versions)
===================================================================================================================
V2.39 2011-11-12
Fixed digital gain was missing on trim adjustment
Added Mirror Mode Conflict Popup screen
Added Record Mode Conflict Popup screen
===================================================================================================================
V2.38 2011-11-12
Fixed un-looped check sum problem with dir struct,
Changed no longer pre-init channel names in erase hard disk
fixed Name Primary Folder (would ignore your folder name if it thought it was too long)
fixed COM button works now
===================================================================================================================
V2.37 2011-11-10
Added False Start dialog: press STOP (while in STOP mode) to enter false start screen
fixed potential oddity in NORMAL_MIRROR_MODE
added UI support for new LONG KEY system
fixed problem with Dane-Elec 4GB cards not handling 512 sector reads
added highlighted meter trim diamond for auto-trim
===================================================================================================================
V2.36 2011-11-10
Fixed PFL text overlapping on the non-compact home screen
Fixed current folder not remembering itself after a power cycle
Fixing Scene Take Note auto-creation oddities
===================================================================================================================
73