Increment Ubits; Ub Date Style; Zaxnet Channel Page; Bus Routing Page - Zaxcom Nomad User Manual

Zaxcom Nomad User's Manual_____________________________________________________Chapter 2
o While in Record and press Stop
If you just need to send running timecode to another device, set it to Generator.
If you want to control another timecode device with an Auto-Load capability, set it to Card.

Increment UBits

To set whether or not the user-bits will increment with each Take, press the INCREMENT UBITS button and
select the appropriate choice.

UB Date Style

To set how the date, transmitted as part of the TC, is formatted, press the UB DATE STYLE button and select the
appropriate choice.

ZaxNet Channel page

Page purpose:
How to get here:
(ZNET key once)
Once this page is being displayed, press one of the multi-function keys to select a channel to review and modify.

Bus Routing page

Page purpose:
How to get here:
(BUS key)
– TC for the start of the last Take.
This page controls how ZaxNet interfaces with wireless kits on each audio input channel.
This page manages the pages that indicate which input, if any, are routed to specific outputs.

Figure 2-11 ZaxNet Channel page

Figure 2-12 Bus Routing page

29