Parts needed:
• (1) SWING BEAM ASSEMBLY
• (1) HC - BACKYARD DISCOVERY ID TAG - A100164
• (1) WAVE RIDER ASSEMBLY
Phase Notes
• Assemble with hardware as shown.
WAVE RIDER
MOUNTING BRACKET
F
Step 3: Attach the Wave Rider Assembly to
'SB73' Swing Beam using the Wave Rider
Mounting Bracket by inserting Bolts 'F'
through the Wave Rider Mounting Bracket
and the 'SB73' Swing Beam into 'E' Nut
Barrel, as shown.
Swing Beam Attachment
Phase 28
E
SB73
CY
Hardware needed:
• (4) BX - WASHER SPLIT 5/16 - H100095
• (4) CD - WASHER FLAT 8x27 - H100105
• (4) AJ - BOLT HEX 5/16x1-1/4 - H100042
• (4) CY - SCREW PWH 8x5/8 - H100128
• (2) E - NUT BARREL WH 5/16x1-3/4 - H100007
• (2) F - BOLT WH 5/16x1 - H100008
G1
GD
CD
SB73
Step 2: Attach Backyard Discovery ID
Tag 'HC' on Swing Beam 'SB73' using
Screws 'CY', as shown.
HC
BX
AJ
Step 1: Attach the Swing
Beam Assembly to 'G1'
swing beam mount using
Bolts 'AJ', Washer 'BX' &
Washer 'CD' through the
angle brackets into T-Nut
'BG', as shown.