Swing Arms To Board Assembly - Backyard Discovery Montpelier 30211 Owner's Manual

Parts needed:
• (1) LW - WAVE RIDER BOARD ASSEMBLY - A100231
• (1) LEFT SWING ARM ASSEMBLY
• (1) RIGHT SWING ARM ASSEMBLY
Phase Notes
• Assemble with hardware as shown.
RIGHT SWING
ARM ASSEMBLY

Swing Arms to Board Assembly

LEFT SWING
ARM ASSEMBLY
LW
ATTACHMENT SLEEVE
Phase 3
Hardware needed:
• (8) MQ - SCREW PFH #10x3/4 BLACK - H100158
• (4) LZ - BOLT (M10x19MM) - H100154
• (4) CF - WASHER LOCK INT. (10x18) - H100107
MG
MQ
CF
Step 1: Slide 'MG' boot up the swing arm assembly
to allow veiw of attachment sleeve. Align swing arm
attachment sleeves with the wave rider bracket and
secure using 'LZ' Bolt (M10x19MM) and 'CF' Washer
Lock Int. (10x18), as shown.
MD
CF
MQ
MD
CF
MQ
WAVE RIDER BRACKET
ATTACHMENT SLEEVE
MG
Step 2: Slide 'MG' boot
down the swing arm
assembly to the 'LW' Wave
Rider Board and secure
CF
using 'MQ' Screw PFH
#10x3/4 Black, as shown.
MQ
WAVE RIDER BRACKET
LY