8 Foot Slide Assembly - Backyard Discovery Montpelier 30211 Owner's Manual

TOP
TOP
13 5/8
8 5/8
3 5/8
1
TIP: PREBENDING THE ENDS WILL EASE ASSEMBLY.

8 FOOT SLIDE ASSEMBLY

PHASE 1
Phase Notes
● DRILL 3 HOLES AT ONE END OF THE PLASTIC SLIDE BED USING A 5/16" DRILL BIT AND USING THE
DIMENSIONS SHOWN BELOW. THIS END WILL BE THE TOP OF THE SLIDE.
● TAKE NOTE OF SLIDE BED SURFACE FINISH, THE DULL SIDE WILL BE TOWARDS THE GROUND. PLACE
SLIDE BRACE CENTERED ON THE BOTTOM (DULL SIDE) AND 1/4" FROM THE EDGE. TRANSFER HOLES
ON THE BOARD THROUGH THE SLIDE BED AS SHOWN BELOW. USE A 5/16" DRILL BIT.
● ATTACH SLIDE BRACE TO SLIDE USING HARDWARE SHOWN.
BRIGHT SIDE
SLIDE BED 8' YELLOW
NUT BARREL WH 5/16x5/8
WASHER LOCK EXT 12x19
QTY DESCRIPTION
1 SLIDE BRACE
3 BOLT WH 5/16x1/2
3 NUT BARREL WH 5/16x5/8
3 WASHER LOCK EXT 12x19
1 SLIDE BED 8' YELLOW
SLIDE BRACE
BOLT WH 5/16x1/2
REV 5/26/10 BRS
BOTTOM