Mounting Brackets To Swing Arms Assembly - Backyard Discovery Montpelier 30211 Owner's Manual

Mounting Brackets to Swing Arms Assembly

Parts needed:
• (1) LX - BEAM BRACKET (86x134 - GREEN) - A100232
MH - BEAM BRACKET (50x134 - GREEN) - A100237
• (1) LEFT SWING ARM ASSEMBLY
• (1) RIGHT SWING ARM ASSEMBLY
Phase Notes
• Assemble with hardware as shown.
NOTE: Depending on the size of your
Wave Rider, the Beam Bracket will be
one of the following: 'LX' or 'MH', but
not both.
RIGHT SWING
ARM ASSEMBLY
Phase 4
MQ
CF
LEFT SWING
ARM ASSEMBLY
UPPER TUBE
Step 1: Slide 'LX' or 'MH' Beam Bracket over the top of the
swing beam and secure bracket to the swing beam with the
screws provided. (SEE THE SWING SET INSTRUCTION
MANUAL FOR PROPER SCREWS NEEDED FOR SECURING
WAVE RIDER TO THE SWING BEAM.) Align swing arm
attachment sleeves with the 'LX' or 'MH' beam bracket and
secure using 'MQ' Bolt (M10x19MM) and 'CF' Washer Lock
Int. (10x18), as shown.
Hardware needed:
• (4) MQ - BOLT (M10x19MM) - H100154
• (4) CF - WASHER LOCK INT. (10x18) - H100107
LX MH
CF
CF MQ
MQ
UPPER TUBE