• Frequently Asked Questions • • Assembly Instructions • • Warranty Information Manufacturer: Backyard Discovery 3001 North Rouse Pittsburg, KS 66762 1-800-856-4445 Register your new swing set on-line @ www.swingsetsonline.com (you will also find any updates on assembly instructions and...
Page 2
STOP PARE Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit www.swingsetsonline.com ¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA! La tienda donde realizó...
Owner’s Manual Play Set Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
Owner’s Manual Play Set Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Playcenter 1. The Playcenter is designed to be installed on a level surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation. 2.
Owner’s Manual Play Set The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth 6" (152mm) 9" (228mm) 12"...
Owner’s Manual Play Set 18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it. 19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation hazard.
Third Party Assembly: Customer may, in their sole discretion, elect to use a third party person or service to assemble this product. Backyard Discovery assumes no responsibility or liability for any charge incurred by the Customer for any assembly services’.
Page 8
Owner’s Manual Play Set APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information: www.cpsc.gov/cpscpub/pubs/323.html. X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK X3.1 Select Protective Surfacing—One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment.
Page 9
Owner’s Manual Play Set The American Society for Testing and Materials takes no position respecting the validity of any parent right asserted in connection with any item mentioned in this standard. Users of this standard are expressly advised that determination of the validity of any such parent rights, and the risk of infringement of such rights, are entirely their own responsibility.
Page 10
5. How often should the playset be stained? Backyard Discovery recommends the playset be stained once each year. A water or oil based stain can be used at the customer’s discretion. 6. Why does it seem that my swing set is developing cracks? Wood is a natural material;...
Basic Setup Dimensions Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. 24'-7 1/2" [7.5] 12'-7 1/2" [3.8] 12'-7 1/2"...
Tools Required for Installation: (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.) (Square) (Open End Wrenches 1/2") (Level 24") (Claw Hammer) (Tape Measure) (3/8" Drive Ratchet, 1/2" STD Sockets 1/2"...
Page 20
Parts Identification Accessories (NOT TO SCALE) GK - WINDOW FRAME 216x267 BYD GREEN - A100146 JZ - PICNIC TARP - A100143 EY - TUBING CAP GLIDER SUPPORT EB - WINDOW FRAME GREEN - A100067 343x444.5 - A100044 DL - GLIDER SEAT YELLOW - A100023 EX - GLIDER BUSHING BYD GREEN - A100066 DK - GLIDER ARM BYD GREEN - A100022 EW - GLIDER SUPPORT BYD GREEN - A100065...
Page 21
Parts Identification Accessories (NOT TO SCALE) KD - PLASTIC GROUND STAKE BROWN - A100179 EK - SLIDE RAIL 8' GREEN RIGHT - A100054 EL - SLIDE RAIL 8' GREEN LEFT - A100055 DE - TRIANGLE PLATE 90 5 HOLE BYD GREEN - A100011 EM - SLIDE BED 8' YELLOW - A100056 EA - HAND GRIP YELLOW PLASTIC...
Page 22
8 FOOT SLIDE ASSEMBLY PHASE 1 Phase Notes DRILL 3 HOLES AT ONE END OF THE PLASTIC SLIDE BED USING A 5/16" DRILL BIT AND USING THE DIMENSIONS SHOWN BELOW. THIS END WILL BE THE TOP OF THE SLIDE. TAKE NOTE OF SLIDE BED SURFACE FINISH, THE DULL SIDE WILL BE TOWARDS THE GROUND. PLACE SLIDE BRACE CENTERED ON THE BOTTOM (DULL SIDE) AND 1/4"...
Page 23
8 FOOT SLIDE ASSEMBLY PHASE 2 Phase Notes PLACE 1 SLIDE RAIL ON A FLAT SURFACE AND BEGIN INSERTING SLIDE BED AT THE BOTTOM OF THE SLIDE RAIL. PUT SLIDE SUPPORT BOTTOM INTO THE SUPPORT POCKET AT THE BOTTOM OF THE RAIL AND HAVE A HELPER BEND THE SLIDE BED TOWARDS THE TOP OF THE SLIDE AND INSERT THE BED INTO THE SLIDE CAVITY.
Page 24
4 Ft Ladder Phase 1 & 2 Phase Notes DESCRIPTION LABEL • Assemble with hardware as shown. LEFT UPRIGHT • Center rungs in rail grooves. LADDER RUNG SCREW PFH 8x2 SCREW PFH 8x2 DESCRIPTION LABEL RIGHT UPRIGHT SCREW PFH 8x2 SCREW PFH 8x2...
Page 28
SWING BEAM ASSEMBLY SWING HANGER STEP 3 QUICK LINK BOLT WH SWING ATTACH (2) QZ TRIANGLE PLATES TO W71 SWING BEAM SUPPORT USING 5/16x1 3/4 HANGER 1-3/4" BOLTS AND 7/8" BARREL NUTS (FIG. 1). QUICK LINK BOLT WH INSERT SWING HANGER QUICK LINK AND SAFETY WASHER INTO HOLES IN 5/16x5 3/4 THE EDGE OF SB74 SWING BEAM.
KD - PLASTIC GROUND STAKE BROWN - A100179 Anchoring Instructions NOTE: FAILURE TO USE GROUND STAKES CAN VOID WARRANTY & CAUSE INJURY! STAKE A SCREW PFH GROUND STAKE GROUND STAKE STEP 37 DRIVE GROUND STAKE INTO GROUND AND FASTEN GROUND STAKE GROUND STAKE WITH 2"...
Limited Warranty. In addition, Backyard Discovery will replace any parts within the first 30 days from date of purchase found to be missing from or damaged in the original packaging.