O P E R A T I O N
Ensure that the cover is secured proper-
ly behind the cab.
The cover is correctly secured when the
rod incorporated in the cover engages in
the rain channel at the rear of the cab
and the left and right hand ends are bolt-
ed to the canopy frame.
When the cover and rails have been re-
moved, care should be taken when refitt-
ing to ensure that the foam seal is stuck
properly in the rain channel (if necessary
To drop side boards - pull handle out-
wards to release locking pin und swing
down to lift hook.
On vehicles with support cables for the
tailboard, not more than 150 kg should
be placed on the tailboard when it is
The handbrake is located between the
To apply the handbrake pull lever up
firmly. On hilly roads the 1st gear or on
automatic gearboxes the parking lock,
should also be engaged. The handbrake
should always be applied so firmly that
it is not possible to drive off accidentally
with handbrake slightly on.
When handbrake is applied with the
ignition on, the brake warning l a m p *
To release handbrake, pull lever up
slightly, press locking knob in and push
lever right down.
www.WestfaliaT3.info - a useful website for owners and enthusiasts of VW Westfalia T25 / T3 / Vanagon Campervans