Configuring Your Server - NEC N8400-086F User Manual

4-14 Configuring Your Server

IMPORTANT:
change TPM State, a confirmation screen as shown below appears at
the end of POST after restarting the system. Select [Execute] on the
confirmation screen to determine the change you have made.
When [Enable & Activate] is selected:
When [Deactivate & Disable] is selected:
When [Clear] is selected:
If you select any parameter except for [No Change] to
Physical Presence operations
TPM configuration change was requested to
State: Enable & Activate
Note:
This section will switch on the TPM
Reject
Execute
Physical Presence operations
TPM configuration change was requested to
State: Deactivate & Disable
Note:
This action will switch off the TPM
WARNING!!!
Doing so might prevent security applications
that rely on the TPM from functioning
as expected
Reject
Execute
Physical Presence operations
TPM configuration change was requested to
State: Clear
WARNING!!!
Clearing erases information stored on the TPM.
You will lose all created keys and access to
data encrypted by these keys.
Reject
Execute