NEC N8400-086F User Manual page 263

When the system is Windows Server 2003 x64 Editions / Windows Server 2003
When PROSet is not installed
1.
Start Device Manager.
2.
Point to [Network adapters] and double click [Intel(R) 82576 Gigabit Dual Port Server
Network Connection]/[Intel(R) 82576 Gigabit Dual Port Server Network Connection #2]
to open the adapter [Properties].
3.
Click [Power Management] tab and change setting in [Wake On LAN] according to the
following list.
Setting item
"Allow the computer to turn off this device to
save power"
"Allow this device to bring the computer out of
standby"
4.
Click [Advanced] tab and point to [Enable PME].
5.
Set the "Enable" in [Value].
6.
Click [OK].
7.
Reboot the system.
Installing the Operating System B-45
Default setting
ON
OFF
Change setting
ON
ON