NEC N8400-086F User Manual page 85

NOTES:
You can use only the physical devices that have same model
number to configure logical drive.
If the process is not finished normally, the driver may not be stored
in the EXPRESSBUILDER. Refer to "Optional Board Supported
by NEC EXPRESSBUILDER" described earlier in this chapter.
When you use RAID Controller, if [Skip the logical drive creation]
is not selected at [Enter RAID settings] screen, refer to "RAID
Configuration (Chapter 4)" in User's Guide that comes with the
Storage and I/O Blade AD106a, or "Creating New RAID using
RAID Controller (Page 5-55 in this User's Guide)" to create RAID
beforehand.
9.
Specify the installing medium and the Windows system partition.
[Specify medium / Partition] steps are displayed. Confirm the parameters, modify if
necessary, and then click [Next].
Installing the Operating System with Express Setup 5-13