Installing And Setting Device Drivers - NEC N8400-086F User Manual

19.
Read the contents carefully and click [Yes] if you do agree. If you do not agree, click
[No].
IMPORTANT:
If you do not agree to this agreement, the setup terminates and
Windows Server 2003 will not be installed.
If "NetWare Gateway (and Client) Service" is specified to install,
the window to specify the details of "NetWare Gateway (and
Client) Service" pops up on the first logon. Specify the appropriate
value.
Windows Server 2003 and selected applications will be installed automatically and
rebooted several times.
After rebooting, it logs on to the system automatically.
20.
If you install Microsoft Windows Server 2003 R2, insert Microsoft Windows Server 2003
R2 Standard Edition DISC 2 or Microsoft Windows Server 2003 R2 Enterprise Edition
DISC 2 into the optical disk drive after the OS installation.
Hereinafter, proceed operations according to the message.
When the installation has finished, remove Microsoft Windows Server 2003 R2 Standard Edition
DISC 2 or Microsoft Windows Server 2003 R2 Enterprise Edition DISC 2 from the optical disk
drive, and restart the system.
Now the Setup using Express Setup has completed.
After Express Setup has completed, be sure to execute the tasks described in "Setup of Device
Driver (Normally Install in Server)" of Appendix B.

Installing and Setting Device Drivers

Be sure to execute the tasks described in "Setup of Device Driver (Normally Install in Server)" of
Appendix B.
Installing the Operating System with Express Setup 5-39