NEC N8400-086F User Manual page 61

Advanced Chipset Control
Option
Multimedia Timer
Intel(R) I/O AT
Intel(R) VT-d
Wake On
LAN/PME
Wake On Ring
Wake On RTC
Alarm
IMPORTANT:
If the AC power is turned off while the Wake On Ring feature is
enabled, this feature is disabled at the next system boot after AC
power-on. You need to press the Power switch to boot the system. If
the AC power is turned off, Wake On Ring feature on power
management chip is disabled until the next DC power-on.
To use this feature on Windows Server 2003, see Chapter 8
"Problems with Windows Server 2003".
Parameter
Disabled
[Enabled]
Disabled
[Enabled]
Disabled
[Enabled]
Disabled
[Enabled]
[Disabled]
Enabled
[Disabled]
Enabled
Description
Specify whether the system supports
the multimedia timer feature.
Enables or disables the Intel(R)
Acceleration technology.
Specify whether the Intel(R)
Virtualization Technology for Directed
I/O feature is enabled or disabled. This
item appears only when the processor
supports this feature.
Specify whether the remote power-on
feature through the device connected
to the standard network card or
expansion slot card is enabled or
disabled. To use Wake On LAN
feature, set the link speed and duplex
to [Auto].
Specify whether the remote power-on
function through a serial port is
enabled or disabled.
Specify whether the remote power-on
function by using RTC alarm feature is
enabled or disabled.
Configuring Your Server 4-11
Your Setting
[ ]: Factory-set