Forced Shutdown - NEC N8400-086F User Manual

8-34 Troubleshooting

FORCED SHUTDOWN

Use this function when an OS command does not shut down the CPU blade, the POWER switch
does not turn off the CPU blade, or resetting does not work.
Press and hold the POWER switch on the CPU blade for at least four seconds. The power is forcibly
turned off. To turn on the power back again, wait approximately 10 seconds after turning off the
power.
The power of the CPU blade can be turned off by using remote control feature of EXPRESSSCOPE
Engine 2 (BMC).
POWER switch
IMPORTANT:
power once to load the OS, and turn off the power again in the normal
way.
1
2
ID
If the remote power-on function is used, cycle the