Installing The Windows Server 2008 - NEC N8400-086F User Manual

Installing the Windows Server 2008

Express Setup proceeds the setup by selecting or inputting several parameters on the wizard. You
can also save the parameters to a floppy disk as a parameters file.
1.
Turn the power of peripheral device on, and then turn on the server.
2.
Insert the NEC EXPRESSBUILDER DVD into the optical disk drive of the server.
3.
Press the RESET switch or press Ctrl, Alt, and Delete to reboot from the NEC
EXPRESSBUILDER. (You may also turn off and then on again to reboot the server.)
The system will boot from the DVD and NEC EXPRESSBUILDER starts.
Select "Os installation *** default ***" from the Boot selection menu.
(If you do not hit any key, "Os installation" is selected automatically.)
The Top menu will appear.
Installing the Operating System with Express Setup 5-9