Mezzanine Card - NEC N8400-086F User Manual

9-20 Upgrading Your Server

Mezzanine Card

The CPU blade can contain two mezzanine cards for blade which allows a network extension or a
file device feature extension. To install a mezzanine card, use the mezzanine card slot installed on
the CPU blade. The mezzanine card slot is factory-installed on the CPU blade.
IMPORTANT:
The mezzanine card is extremely sensitive to static electricity. Make
sure to touch the metal frame of the server to discharge static
electricity from your body before handling the mezzanine card. Do
not touch the terminals and parts on the mezzanine card by a bare
hand and place the cards directly on the desk. For static notes, see
the section "Anti-static Measures" described earlier.
A combination of boards can be installed in the Blade Enclosure
under certain restrictions. Contact your service representative for
details.
NOTE:
boards. Refer to the manual shipped with the board to check whether
the expansion ROMs should be expanded. Use the BIOS setup utility
"SETUP" for the setting. See Chapter 4 for details.
Some optional mezzanine cards use expansion ROMs on the
CPU blade
Mezzanine slot (Type II)
Mezzanine slot (Type I)