NEC N8400-086F User Manual page 70

4-20 Configuring Your Server
IMPORTANT:
Executing "Load Setup Defaults" in BIOS SETUP utility does not
restore the default value for settings related to management LAN of
BMC. To restore the default value, you need to execute Clear BMC
Configuration.
It takes about several tens seconds until initialization completes
after execution of Clear BMC Configuration.
If you are using NEC ESMPRO Agent Extension, settings for
remote management feature made in NEC ESMPRO Agent
Extension is also cleared by executing Clear BMC Configuration.
Before execution, be sure to make backup copy of setting
information for remote management feature by using NEC
ESMPRO Agent Extension or "System Management" in Tool menu
of NEC EXPRESSBUILDER.
NOTE:
BIOS SETUP does not save the settings you have made in BMC LAN
Configuration menu.
Event Log Configuration Submenu
Option
System Event Log
Auto Clear Event
Logs
Clear All Event
Logs
Notes on performing Clear BMC Configuration
Executing [Save Custom Defaults/Load Custom Defaults] of
Parameter
–
[Disabled]
Enabled
–
Description
System Event Log submenu is
displayed.
If set to "Enabled", logs are
automatically cleared when the error
log area is fulfilled.
Press Enter and select "Yes" to clear
the system event log.
Your Setting
[ ]: Factory-set