Mf Assist Functions; Enlargement In Af Mode - Leica Q2 MONOCHROM Instruction Manual

EN TOUCH AF + SHUTTER BUTTON
The combination
Touch AF + Release Touch AF + Release
AF metering field for immediate recording.
▸ Select in the main menu
Focusing Focusing
▸ Select
Touch AF Touch AF
▸ Select
Touch AF + Release Touch AF + Release
▸ Briefly tap the LCD panel in the desired position
TOUCH AF IN EVF MODE
Touch AF is deactivated by default when EVF is in use to prevent
any inadvertent altering of the AF metering field. Touch AF can,
however, also be used in EVF mode.
Factory setting:
Off Off
▸ Select in the main menu
Focusing Focusing
▸ Select
Touch AF in EVF Touch AF in EVF
▸ Select /
On On Off Off
Note
• In this case, you can change the position of the AF metering field
by swiping.
72
allows a direct placement of the

MF ASSIST FUNCTIONS

ENLARGEMENT IN AF MODE

You can access the enlargement function independent of focusing
for a better assessment of the settings.
The function must be assigned to the
Magnification Magnification
thumbwheel button to use this feature (see p. 51).
Accessing the enlargement function
▸ Press the button / thumbwheel button
FN
• An enlarged image section appears. The position of the
enlargement depends on the position of the AF metering field.
• The rectangle within the frame at the top right represents the
current magnification, as well as its position in the displayed
cropped section.
Adjusting the enlargement function
▸ Press the center button
• The image section toggles between magnification factors
(3x/6x).
Changing the position of the enlarged section
▸ Press the directional pad left or right as needed
Exiting the enlargement function
▸ Tap the shutter button
Notes
• The enlargement function remains active until it is exited.
• The most recently used function and zoom factor will still be set
the next time the function is accessed.
button or
FN