Dial And Incoming Call Parameter Settings; Dial Parameter Settings; Redial Tries; Redial Interval - Oki OKIFAX 5900 User Handbook Manual

Dial and Incoming Call Parameter
Settings
These settings allow you to control the way your machine
dials telephone numbers and received incoming calls. Setting
these functions before beginning use of your machine will
make your fax communications more efficient.
To set these parameters
1 Press Menu/Exit to enter the menu.
2 Input the speed access number.
3 Use or to select the desired setting, Press Enter.
4 Press Menu/Exit to return to standby mode.

Dial Parameter Settings

Note: Factory Default settings are in bold italics.

Redial Tries

Speed access no. 40.
This function controls how many times your machine will
automatically redial a number that is busy or does not answer.
Available settings are from 0 to10 tries. Speed access no. 40.
The default setting is 3 tries.
|
32 Handbook

Redial Interval

Speed access no. 41.
The function controls how long your machine waits between
each automatic redial attempt. Available settings are from 1 to
6 minutes. Default setting is 3 minutes between dialing
attempts.

Auto Start

Speed Access no. 42.
With this function set to ON, the machine will automatically
begin dialing as soon as a location is selected by pressing a
One-Touch key or by entering another Speed Dial number.
There is no need to press the Start key.

Dial Tone Detect

Speed access no. 43
This function allows your machine to wait for and detect a
dial tone before dialing. Set to ON, a dial tone must be
detected.

Busy Tone Detect

Speed access no. 44
This function allows your machine to detect a busy tone when
sending a fax. Available settings are ON and off.