First Time Connecting To The Switch - D-Link xStack DES-3800 Series User Manual

First Time Connecting to the Switch

The Switch supports user-based security that can allow prevention of unauthorized users from accessing the Switch or changing
its settings. This section tells how to log onto the Switch.
Upon initial connection to the Switch, users will be presented with the first login screen.
NOTE: Press Ctrl+R to refresh the screen. This command can be used at any time to
force the console program in the Switch to refresh the console screen.
Press Enter in both the Username and Password fields. You will be given access to the command prompt DES-3828:admin#
shown below:
There is no initial username or password. Leave the Username and Password fields blank.
Copyright(c) 2008 D-Link Corporation. All rights reserved.
UserName:
Password:
DES-3828:admin#
NOTE: The first user automatically gets Administrator level privileges. It is recommended to
create at least one Admin-level user account for the Switch.
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
NOTE: The passwords used to access the Switch are case-sensitive; therefore, "S" is
not the same as "s."
DES-3828 Fast Ethernet Switch Command Line Interface
Firmware: Build 4.50.B10
Figure 4- 2. Command Prompt
21