Pim Register Checksum Settings - D-Link xStack DES-3800 Series User Manual

The following fields can be viewed or set:
Parameter
Group Address
Group Mask
Interface Name
Click Apply to implement changes made.

PIM Register Checksum Settings

This window is used to set a first hop router to create checksums to be included with the data in Registered packets. To view this
window, click Configuration > Layer 3 IP Networking > IP Multicast Routing Protocol > PIM Protocol > PIM Register
Checksum Settings.
Figure 8- 78. PIM Register Checksum Include Data RP List Settings window
To configure the settings for this window, click the Add button, which will reveal the following window for the administrator to
configure.
Figure 8- 79. PIM Register Checksum Include Data RP List Settings - Add window
The following fields can be set:
Parameter
RP Address
Click Apply to set the RP as a checksum enabled router.
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 8- 77. PIM Candidate RP Settings – Add window
Description
Enter the multicast group address for this CRP. This address must be a class D address.
Enter the mask for the multicast group address stated above.
Enter the name of the PIM-SM enabled interface the switch administrator wishes to become
the CRP for this group.
Description
Enter the IP address of the RP that will verify checksums included with Registered packets.
188