D-Link xStack DES-3800 Series User Manual page 282

To view the windows for Download Certificate and Ciphersuite, click Security > SSL:
To download certificates, set the following parameters and click Apply.
Parameter
Certificate Type
Server IP
Certificate File Name
Key File Name
To set up the SSL function on the Switch, configure the following parameters and click Apply.
Parameter
SSL Status
Cache Timeout (60-
86400)
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 11- 42. Download Certificate and Ciphersuite window
Description
Choose the type of certificate to be downloaded from the drop-down menu. This type refers
to the server responsible for issuing certificates. This field has been limited to local for this
firmware release.
Enter the IP address of the TFTP server where the certificate files are located.
Enter the path and the filename of the certificate file to download. This file must have a .der
extension. (Ex. c:/cert.der)
Enter the path and the filename of the key file to download. This file must have a .der
extension (Ex. c:/pkey.der)
Description
Use the pull down menu to enable or disable the SSL status on the switch. The default is
Disabled.
This field will set the time between a new key exchange between a client and a host using
the SSL function. A new SSL session is established every time the client and host go
through a key exchange. Specifying a longer timeout will allow the SSL session to reuse the
master key on future connections with that particular host, therefore speeding up the
negotiation process. The default setting is 600 seconds.
Configuration
266