Rip Interface Settings - D-Link xStack DES-3800 Series User Manual

Timeout Interval
(1-65535)
Garbage-collection
Interval (1-65535)

RIP Interface Settings

RIP settings are configured for each IP interface on the Switch. The menu appears in table form listing settings for IP interfaces
currently on the Switch. To configure RIP settings for an individual interface, click on the hyperlinked Interface Name. To view
this window, click L3 Features > RIP > RIP Interface Settings.
Click the hyperlinked name of the interface you want to set up for RIP, which will give access to the following menu:
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Each route entry has a timeout timer associated with it. When the timeout timer expires, the
route is marked invalid but is retained until the garbage-collection timer expires. The interval
of the timeout timer is set to a default of 180 seconds.
When the timeout timer for a route entry expires, this route entry has a garbage-collection
timer associated with it. When the garbage-collection timer expires, this route is deleted. The
interval of the garbage-collection timer is set to a default of 120 seconds.
Figure 8- 14. RIP Interface Settings window
133