First Time Connecting To The Switch - D-Link DES-3624 Series User Manual

4. Items in UPPERCASE are commands. Moving the
selection to a command and pressing Enter will execute
that command, e.g., SAVE or EXIT.
Please note that the command APPLY only applies for the
current session. Use Save Changes from the main menu for
permanent changes. An asterisk "*" indicates a change has
been made but won't take effect until the Switch has been
rebooted.

First Time Connecting To The Switch

The Switch supports user-based security that can allow you to
prevent unauthorized users from accessing the Switch or
changing its settings. This section tells how to log onto the
Switch.
Note: The passwords used to access the Switch are case
sensitive; therefore, "S" is not the same as "s."
When you first connect to the Switch, you will be presented
with the first login screen (shown below). Press Ctrl+R (hold
down the Ctrl key, press the R key, and release both keys)
to call up the screen, if the initial login screen does not
appear. Also Ctrl+R can be used at any time to refresh the
screen.
Using the Console Interface
Stackable NWay Ethernet Switch User's Guide
55