Connecting DC Power to the DES-3828DC
Follow the instructions below to connect the DC power supply of the DES-3828DC to the DC power source.
Figure 2 - 4. Power connections attached to contacts after assembly
1. Firmly attach the DC power to the negative and positive contacts on the wiring assembly.
•
The negative pole (-) connects to the -48V contact.
•
The positive pole (+) connects to the -48V Return contact.
•
If available, an earth ground may be connected to the center contact post.
2. Tighten the contact screws to secure the connection.
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
11