Snmp Engine Id; Snmp Trap Settings - D-Link xStack DES-3800 Series User Manual

SNMP Engine ID

The Engine ID is a unique identifier used for SNMP V3
implementations. This is an alphanumeric string used to
identify the SNMP engine on the Switch. To display the
Switch's SNMP Engine ID, click Administration >
SNMP Manger > SNMP Engine ID. This will open
the SNMP Engine ID Configuration window, as
shown below.
To change the Engine ID, type the new Engine ID in the space provided and click the Apply button.

SNMP Trap Settings

The following window is used to enable and disable trap settings for the SNMP function on the Switch. To configure the SNMP
Trap Settings, click Administration > SNMP Manager > SNMP Trap:
To enable or disable the Traps State and/or the Authenticate Traps State, use the corresponding pull-down menus to change the
settings and click Apply.
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 6-34. SNMP Trap Settings window
Figure 6- 33. SNMP Engine ID Configuration window
61