To define an Enable Login Method List, set the following parameters and click Apply:
Parameter
Method List Name
Method 1, 2, 3, 4
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 11- 34. Enable Method List - Edit window
Figure 11- 35. Enable Method List - Add window
Description
Enter a method list name defined by the user of up to 15 characters.
The user may add one, or a combination of up to four of the following authentication
methods to this method list:
local_enable - Adding this parameter will require the user to be authenticated using
•
the local enable password database on the Switch. The user in the next section
entitled Local Enable Password must set the local enable password.
none - Adding this parameter will require no authentication to access the Switch.
•
radius - Adding this parameter will require the user to be authenticated using the
•
RADIUS protocol from a remote RADIUS server.
tacacs - Adding this parameter will require the user to be authenticated using the
•
TACACS protocol from a remote TACACS server.
xtacacs - Adding this parameter will require the user to be authenticated using the
•
XTACACS protocol from a remote XTACACS server.
tacacs+ - Adding this parameter will require the user to be authenticated using the
•
TACACS protocol from a remote TACACS server.
server_group - Adding a previously configured server group will require the user to
•
be authenticated using a user-defined server group previously configured on the
Switch.
258