Pim Monitoring; Browse Pim Neighbor Table; Pim Ip Mroute Table - D-Link xStack DES-3800 Series User Manual

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 12- 31. DVMRP Routing Next Hop Table

PIM Monitoring

Multicast routers use Protocol Independent Multicast (PIM) to determine which other multicast routers should receive multicast
packets. To find out more information concerning PIM and its configuration on the Switch, see the IP Multicast Routing
Protocol chapter of Section 6, Configuration.

Browse PIM Neighbor Table

The PIM Neighbor Table contains information regarding each of a router's PIM neighbors. To search this table, enter either an
Interface Name or Neighbor Address into the respective field and click the Find button. PIM neighbors of that entry will appear
in the PIM Neighbor Table below. This screen may be found by clicking Monitoring > PIM Monitor > Browse PIM Neighbor
Table.
Figure 12- 32. PIM Neighbor Table

PIM IP MRoute Table

The PIM IP MRoute Table is used to view information regarding the multicast data route entries in the Switch. This screen may
be found by clicking Monitoring > Layer 3 Feature > PIM Monitor > Browse PIM IP MRoute Table.
Figure 12- 33. PIM IP MRoute Table
320