D-Link xStack DES-3800 Series User Manual page 234

Replace DSCP (0-63)
Class (0-255)
Flowlabel (0-FFFFF)
Source IPv6 Address
Destination IPv6
Address
Port
To view the settings of a previously correctly configured rule, click
window:
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Select this option to instruct the Switch to replace the DSCP value (in a packet that
meets the selected criteria) with the value entered in the adjacent field.
The user may enter a value for the Class to instruct the Switch to examine the class
field of the IPv6 header.
The user may instruct the Switch to examine the flow label field of the IPv6 header.
This flow label field is used by a source to label sequences of packets such as non-
default quality of service or real time service packets.
The user may specify an IP address mask for the source IPv6 address by checking the
corresponding box and entering the IP address mask.
The user may specify an IP address mask for the destination IPv6 address by checking
the corresponding box and entering the IP address mask.
The user may set the Access Rule to Permit or Deny on a per-port basis by entering a
port number in this field. Any other specified criteria applies as well.
Figure 10- 59. Access Rule Display window (IPv6)
in the Access Rule Table to view the following
218