Route Redistribution Settings - D-Link xStack DES-3800 Series User Manual

Route Redistribution Settings

Route redistribution allows routers on the network, which are running different routing protocols to exchange routing information.
This is accomplished by comparing the routes stored in the various routers' routing tables and assigning appropriate metrics. This
information is then exchanged among the various routers according to the individual router's current routing protocol. The Switch
can redistribute routing information between the OSPF and RIP routing protocols to all routers on the network that are running
OSPF or RIP. Routing information entered into the Static Routing Table on the local switch is also redistributed.
The following table lists the allowed values for the routing metrics and the types (or forms) of the routing information that will be
redistributed to RIP and OSPF protocol respectively.
Route Destination:
RIP
Route Destination:
OSPF
This window will redistribute routing information between the OSPF and RIP routing protocols to all routers on the network that
are running OSPF or RIP. To access the Route Redistribution Settings window, go to > L3 Features > Route Redistribution
Settings:
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Route Source Metric
OSPF 0 to 16
Static 0 to 16
Local 0 to 16
Route Source
RIP
Static
Local
Table 8- 3. Route Redistribution Source tables
Figure 8- 7. Route Redistribution Settings and Table window
Type
All
Internal
External
ExtType1
ExtType2
Inter-E1
Inter-E2
not applicable
not applicable
Metric
0 to 16777214
0 to 16777214
0 to 16777214
125
Metric Type
Type-1
Type-2
Type-1
Type-2
Type-1
Type-2