D-Link xStack DES-3800 Series User Manual page 272

The Switch contains one Method List that is set and cannot be removed, yet can be modified. To delete a Login Method List
defined by the user, click the
Method List, click on its hyperlinked Method List Name. To configure a new Method List, click the Add button.
Both actions will result in the same window to configure:
To define a Login Method List, set the following parameters and click Apply:
Parameter
Method List Name
Method 1, 2, 3, 4
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 11- 30. Login Method Lists Settings window
under the Delete heading corresponding to the entry desired to be deleted. To modify a Login
Figure 11- 31. Login Method List - Edit window (default)
Figure 11- 32. Login Method List – Add window
Description
Enter a method list name defined by the user of up to 15 characters.
The user may add one, or a combination of up to four of the following authentication
methods to this method list:
tacacs - Adding this parameter will require the user to be authenticated using the
•
TACACS protocol from a remote TACACS server.
xtacacs - Adding this parameter will require the user to be authenticated using the
•
XTACACS protocol from a remote XTACACS server.
tacacs+ - Adding this parameter will require the user to be authenticated using the
•
256