Dhcp Server Binding Table - D-Link xStack DES-3800 Series User Manual

DHCP Server Binding Table

The following window will allow users to view dynamically bound IP addresses of the DHCP server. These IP addresses are ones
that were allotted to clients on the local network and are now bound to the device stated by its MAC address. To view this
window, click L3 features > DHCP Server > DHCP Server Binding Table.
The DHCP Server Binding window is divided into two sections. The top section allows the administrator to delete an existing
DHCP Server Binding Entry and the bottom section displays the DHCP Server Binding Table Entries.
The following parameters may be configured at the top of the window:
Parameter Description
Pool Name To find the bound entries of a specific pool, enter the Pool Name into the field.
IP Address To find the bound entries of a specific pool, enter the IP Address in the field. DHCP Server binding
entries of this pool will be displayed in the table. To clear the corresponding Pool Name and IP
Address entries of this table, click Clear. To clear all entries, click Clear All.
The following parameters appear in the DHCP Server Binding Table:
Parameter Description
Pool Name This field will denote the Pool Name of the displayed dynamically bound DHCP entry.
IP address This field will display the IP address allotted to this device by the DHCP Server feature of this
Switch.
This field will display the MAC address of the device that is bound to the corresponding IP address.
Hardware
Address
Type This field will display the type of node server being used for the previously configured Net BIOS
Name server of this entry.
Status This field will display the Status of the entry, whether it was dynamically bound or manually bound.
Life Time This field will display, in seconds, the time remaining on the lease for this IP address.
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 8- 50. DHCP Server Binding Table window
164