Access Profile Table - D-Link xStack DES-3800 Series User Manual

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch

Access Profile Table

Creating an access profile is divided into two basic parts. The first is to specify which part or parts of a frame the Switch will
examine, such as the MAC source address or the IP destination address. The second part is entering the criteria the Switch will use
to determine what to do with the frame. The entire process is described below in two parts. To display the currently configured
Access Profiles on the Switch, click ACL > Access Profile Table. This will open the Access Profile Table page, as shown
below.
Figure 10- 1. Access Profile Table
To add an entry to the Access Profile Table, click the Add Profile button. This will open the Access Profile Configuration page,
as shown below. There are four Access Profile Configuration pages; one for Ethernet (or MAC address-based) profile
configuration, one for IP address-based profile configuration, one for the Packet Content Mask and one for IPv6. You can
switch between the four Access Profile Configuration pages by using the Type drop-down menu. The user may remove all
Access Profiles by clicking the Clear All button (This button will not clear Address Binding ACL entries, which can only be
deleted through the IP-MAC Binding window). The page shown below is the Ethernet Access Profile Configuration page.
201