Defaults And Policies - Fuji Xerox DocuPrint P505 d User Manual

CentreWare Internet Services

Allowed IP Address/Subnet Mask
Select [Add], and then enter an IP address and an IP mask (Subnet Mask).
To set an IP mask, enter a number from 0 through 128. The number range corresponds to
the 128-bit hexadecimal number comprising IP addresses.
For example:
 When only one IP address (2001:D880:ABCD:EF01:0:20:3:4567) can be used:
- IP Address: 2001:D880:ABCD:EF01:0:20:3:4567
- IP Mask: 128
 When multiple IP addresses (2001:D880:ABCD:EF01:1:1:1:1 to
2001:D880:ABCD:EF01:FFFF:FFFF:FFFF:FFFF) can be used:
- IP Address: 2001:D880:ABCD:EF01:0:20:3:4567
- IP Mask: 64
Note

Domain Filtering
Select an option to filter domains.
When [Allow Specific Domains] is selected, you can specify domains to permit
transmissions. When [Block Specific Domains] is selected, you can specify domains to
prohibit transmissions.
To disable this feature, select [Off].
 Allowed Domains, Blocked Domains
When [Domain Filtering] is set to [Allow Specific Domains] or [Block Specific Domains], you
7
can specify up to 50 domains to allow or block transmissions.

Defaults and Policies

Common
 Startup Page
Select whether to automatically print a startup page every time the printer is powered on.
 [Do Not Auto Print]
Does not print a startup page.
 [Auto Print]
Prints a startup page automatically.
 Default Print Paper Size
You can set the most commonly-used paper size, A4 or 8.5 x 11", as the default paper size.
 When Specified Paper Is Unavailable
When there is no tray containing the paper size selected by the Auto Paper selection, select
whether or not to print with paper loaded in another paper tray. In the event of using a
substitute tray, select [Use Larger Size], [Use Closest Size], [Letter/A4 Substitution] or [Use
Bypass Tray].
134
The setting applies to all features using TCP/IP, such as Print and CentreWare Internet Services.