Setting The Camera Throughput; Setting The Pixel Readout Direction - Dalsa Piranha HS Series User Manual

Piranha HS-xx RoHS User Manual

4.4.3 Setting the Camera Throughput

Purpose:
Syntax:
Syntax Elements:
Notes:
Related Command s
Example:

4.4.4 Setting the Pixel Readout Direction

Purpose:
Syntax:
Syntax Elements:
Notes:
Teledyne DALSA
All manuals and user guides at all-guides.com
Works in conjunction w ith the
d etermines the throughput of the camera. Refer to the tables in
section 4.4.1 How to Configure Camera Output to d etermine w hich
configurations are valid for your camera mod el and how this
command relates to other camera configuration command s.
sot m
m
Output throughput. Allow able values ar e:
80 =
160 = 2 taps at 80MHz or 4 taps at 40MHz
320 = 4 taps at 80MHz or 8 taps at 40MHz
640 = 8 taps at 80MHz
Throu ghpu t is calcu lated as:
Throughput= (Number of Camera Link Taps) x (Camera Link
Pixel Rate in MHz)

To obtain the throughput setting, use the command
clm.

Throughput values are clipped if the camera is unable to
maintain the current throughput setting and a w arning
message is d isplayed .

Refer to the tables in section 4.4.1 How to Configure Camera
Output to d etermine w hich configurations are valid for your
camera mod el.
clm
sot 160
Sets the tap read out from left to right or from right to left. This
command is useful if the camera must be mounted upsid e d ow n.
smm i
i
Read out d irection. Allow able values are:
0 = All pixels are read out from left to right.
1 = All pixels are read out from right to left.

To obtain the current read out d irection, use the command
get
or

This command is available in both TDI and Area Mod e.

Refer to the follow ing figures and tables for an explanation of
pixel read out and mirror d irection.

Refer to section 1.3 Image Sensor for sensor architecture
d iagrams that illustrate sensor read out d irection.
clm
command (see previous) and
4 taps at 20MHz or 2 taps at 40MHz
smm.
49
gcp get
or
gcp
03-032-20013-03