Setting Baud Rate; Camera Help Screen - Dalsa Piranha3 User Manual

24
•
The following parameter conventions are used in the manual:

Setting Baud Rate

Purpose:
Syntax:
Syntax Elements:
Notes:
Example:

Camera Help Screen

For quick help, the camera can return all available commands and parameters through
the serial interface.
There are two different help screens available. One lists all of the available commands to
configure camera operation. The other help screen lists all of the commands available for
retrieving camera parameters (these are called "get" commands).
To view the help screen listing all of the camera configuration commands, use the command:
Syntax:
To view a help screen listing all of the "get" commands, use the command:
Syntax:
Notes:
The camera configuration command help screen lists all available commands. Parameter
ranges displayed are the absolute maximum ranges available. Depending on the current
camera operating conditions, you may not be able to obtain these values. If this occurs,
values are clipped and the camera returns a warning message.
Some commands may not be available in your current operating mode. The help screen
displays NA in this case.
03-032-10216-02
The camera will answer each command with either <CR><LF> "OK >" or
<CR><LF>"Error xx: Error Message >" or "Warning xx: Warning Message". The ">"
is always the last character sent by the camera.
= integer value
i
= real number
f
= member of a set
m
= string
s
= tap id
t
= pixel column number
x
= pixel row number
y
Sets the speed in bps of the serial communication port.
sbr m
m
Baud rate. Available baud rates are: 9600 (Default), 19200,
57600, and 115200.
•
Power-on rate is always 9600 baud.
•
The
the power-on baud rate and will reboot using the last used
baud rate.
sbr 57600
h
gh
For more information on the camera's "get" commands, refer to
section 3.6.6 Returning Camera Settings.
(reset camera) command will not reset the camera to
rc
Piranha 3 User Manual
DALSA