Alarm Lamp Flashes Orange - Canon Pro9500 Mark II Series On-Screen Manual

Alarm Lamp Flashes Orange

>
Advanced Guide Troubleshooting
Alarm Lamp Flashes Orange
When a printer error occurs, the Alarm lamp flashes orange as shown below. The number of flashes
indicates the type of error that has occurred. Count the flashes and take the appropriate action to correct
the error.
(A) Note the number of flashes
(B) Flashes repeatedly
Note
Alarm Lamp Is Lit Orange
The printer is not ready to feed paper from the Front Tray yet. Load the paper correctly in the Front
RESUME/CANCEL
Tray and press the
how to load the paper correctly in the Front Tray.
Power Lamp Flashes Blue
When the Power lamp flashes blue even though the printer is not in use, the printer is shaking the
ink tanks. It takes about 10 seconds to 3 minutes.
The Printer is Vibrating/The Printer Makes the Operation Noise Even When the Printer Is Not in
Use
Number of flashes/Cause
Two flashes:
Paper does not feed in the Rear Tray.
Three flashes:
Front Tray or Front Feed Support is
closed./Paper jams.
Four flashes:
Ink tank is not installed properly./Ink
may have run out.
> Alarm Lamp Flashes Orange
button on the printer. Refer to
Reload paper to the Rear Tray and press the
RESUME/CANCEL
If the Front Tray is closed, open it. The printer resumes
printing.
If the Front Feed Support is closed when printing from the
Front Tray, open it and press the
the printer.
If the error still remains when the Front Tray or the Front Feed
Support is opened, paper may be jammed. Remove the
jammed paper, reload paper in the printer, and then press
the RESUME/CANCEL
Paper Jams
If the lamp on the ink tank is not lit, the ink tank may not
be installed properly.
Install an appropriate ink tank.
If the lamp on the ink tank is flashing, ink may have run
out.
Replacing the ink tank is recommended.
Close the Top Cover after ink tank replacement to resume
printing.
If printing is in progress and you want to continue printing,
RESUME/CANCEL
press the
Then printing can continue under the ink out condition.
Replace the empty ink tank immediately after the printing.
The printer may be damaged if printing is continued under
Loading Paper for details about
Action
button.
RESUME/CANCEL
button.
button with the ink tank installed.
Page 388 of 541 pages
button on