Canon Pro9500 Mark II Series On-Screen Manual page 262

Setting the Number of Copies and Printing Order
Click OK.
The specified number of copies will be printed with the specified printing order.
Important
If the application software that you used to create the document has the same function, give priority
to the printer driver settings. However, if the print results are not acceptable, specify the function
settings on the application software. If you specify the number of copies and the printing order with
both the application and this printer driver, the number of copies may be multiplied numbers of the
two settings or the specified printing order may not be enabled.
Print from Last Page and Collate appear grayed out and are unavailable if Booklet is selected for
Page Layout.
Print from Last Page appears grayed out and is unavailable if Poster is selected for Page Layout.
Note
By setting both Print from Last Page and Collate, you can perform printing so that papers are
collated one by one starting from the last page.
These settings can be used in combination with Borderless, Normal-size, Fit-to-Page, Scaled,
Page Layout, and Duplex Printing.
Page 262 of 541 pages
Page top