Alarm Lamp Flashes Orange - Canon PIXMA iP 3300 User Manual

ALARM Lamp Flashes Orange

ALARM Lamp Flashes Orange
When a printer error occurs, the ALARM lamp flashes orange as shown below.
The number of flashes indicates the type of error that has occurred. Count the
flashes and take the appropriate action to correct the error.
Cause
Two flashes:
Printer is out of
paper. /Paper
does not feed.
Three flashes:
Paper jam.
Four Flashes: Ink
tank is not
installed properly/
Ink may have run
out.
Action
Reload paper in the Auto Sheet Feeder
or Front Feeder and press the RESUME/
CANCEL button.
The paper may be jammed. Remove the
jammed paper, reload paper properly in
the printer, and then press the RESUME/
CANCEL button. See
Possible causes are as follows:
If the lamp on the ink tank is not lit,
the ink tank may not be installed
properly.
Install an appropriate ink tank.
If the lamp on the ink tank is
flashing, ink may have run out.
Replacing the ink tank is
recommended.
If printing is in progress and you want
to continue printing, press the
RESUME/CANCEL button with the
ink tank installed. Then printing can
continue. Replacing the ink tank is
recommended after the printing. The
printer may be damaged if printing is
continued under the ink out condition.
See Replacing an Ink
163
Paper Jams.
Tank.