Power Lamp Flashes Green And Alarm Lamp Flashes Orange Alternately - Canon PIXMA iP3300 Series Quick Start Manual

Cause
Nine flashes: No response from
connected digital camera or video
camcorder. / Connected digital camera
or video camcorder is not compatible
with this printer.
Thirteen Flashes: Ink level cannot be
detected.
Fourteen Flashes: Ink tank cannot be
recognized.
Fifteen Flashes: Ink tank cannot be
recognized.
Sixteen Flashes: Ink has run out.
POWER Lamp Flashes Green and ALARM Lamp Flashes Orange
Alternately
If the POWER and ALARM lamps flash alternately, disconnect the printer cable from the printer, turn the printer off, and then
unplug the printer from the power supply. Plug the printer back in and turn the printer back on after leaving it for a while.
If the problem is not resolved, contact your Canon service representative.
66 Troubleshooting
Disconnect the cable connecting the printer and the device, and then reconnect
it.
Depending on the model or brand of your device, you may have to select a
PictBridge-compliant print mode on the device before connecting it to the
printer. You may also have to turn on the camera or select Play mode manually
after connecting the device to the printer.
Perform necessary operations according your device's instruction manual
before reconnecting it to the printer.
If the error is still not resolved, there is a possibility that you are using a digital
camera or digital video camcorder that is not supported by this printer. Use a
digital camera or digital video camcorder compatible with this printer.
The remaining ink level cannot be correctly detected.
Replace the ink tank and close the Top Cover.
Printing with an ink tank that was once empty may damage the printer.
If you want to continue printing in this condition, you need to release the function
for detecting the remaining ink level. Press and hold the RESUME/CANCEL
button for at least 5 seconds, and then release it.
* With this operation, releasing the function for detecting the remaining ink level
is memorized. Please be advised that Canon shall not be liable for any printer
malfunction or damage caused by refilled ink tanks.
See "Replacing an Ink Tank" on page 22.
The ink tank is not compatible with this printer. (The lamp on the ink tank is off.)
Install an appropriate ink tank.
See "Replacing an Ink Tank" on page 22.
An Ink tank error has occurred. (The lamp on the ink tank is off.)
Replace the ink tank.
See "Replacing an Ink Tank" on page 22.
Ink has run out. (The lamp on the ink tank flashes.)
Replace the ink tank and close the Top Cover.
Printing under the current condition may damage the printer.
If you want to continue printing in this condition, you need to release the function
for detecting the remaining ink level. Press and hold the RESUME/CANCEL
button for at least 5 seconds, and then release it.
* With this operation, releasing the function for detecting the remaining ink level
is memorized. Please be advised that Canon shall not be liable for any
malfunction or trouble which may be caused by continuation of printing under
the ink out condition.
See "Replacing an Ink Tank" on page 22.
Action