Canon Pro9500 Mark II Series On-Screen Manual page 4

Safety Precautions
Always unplug the printer from the power outlet before
cleaning the printer.
If you accidentally switch the printer on while cleaning it, you could
injure yourself or damage the printer.
Maintaining Do not attempt to disassemble or modify the printer. There are
the printer no user serviceable parts inside the printer.
The printer contains high-voltage components. Never attempt any
maintenance procedure not described in this guide.
Do not connect other than recommended devices to the Direct
Print Port or cable connector on the printer. It could cause a
fire or electric shock.
Working Do not use highly flammable sprays near the printer.
around the
This could cause a fire or electric shock if the spray comes into contact
printer
with electrical components inside the printer.
Caution
The following are instructions that, if ignored, could result in personal injury or material damage
caused by incorrect operation of the equipment. These must be observed for safe operation.
Choosing a Do not install the printer in a location that is unstable or
location subject to excessive vibration.
Do not install the printer in locations that are very humid or
dusty, in direct sunlight, outdoors, or close to a heating
source.
To avoid the risk of fire or electric shocks, install the printer in
a location with an ambient temperature range of 5°C to 35°C
(41°F to 95°F) and humidity of 10% to 90% (condensation free).
Do not place the printer on a thick rug or carpet.
Do not place the printer with its back attached to the wall.
Power supply
Working Never put your hands or fingers in the printer while it is
printing.
around the
printer
When moving the printer, carry the printer at both ends.
Do not place any object on the printer.
Do not place metal objects (paper clips, staples, etc.) or
containers of flammable solvents (alcohol, thinners, etc.) on
top of the printer.
If any foreign object (metal or liquid) fall into the printer,
unplug the power cord and call for service.
Ensure that the area around the
power outlet is kept clear at all times
so you can easily unplug the power
cord if necessary.
Never remove the plug by pulling on
the cord.
Do not use an extension lead/cord.
Page 4 of 541 pages