Canon Pro9500 Mark II Series On-Screen Manual page 37

Loading Paper in the Front Tray
> Loading Paper >
Contents
Loading Paper in the Front Tray
Before loading paper, see
Important
When loading paper in the Front Tray, the paper sticks out from the back of the printer. Keep a
space of 15.7 inches / 40 cm for this purpose behind the printer.
There are wheels on the back corners of the printer. Lift up the front of the printer to move it back
and forth.
Note
You can load A3+ (13" x 19"), A3, B4, A4, B5, A5, Letter, Legal, 11" x 17" / 279.4 x 431.8 mm
(Tabloid), Wide (4" x 7.1"), 4" x 6" / 10 x 15 cm, 4" x 8" / 101.6 x 203.2 mm, 5" x 7" / 13 x 18 cm, 8"
x 10" / 20 x 25 cm, 10" x 12" / 25 x 30 cm, and 14" x 17" / 36 x 43 cm sizes of paper in the Front
Tray.
When printing on paper other than 14" x 17" / 36 x 43 cm size from a PictBridge compliant device,
load paper in the Rear Tray.
For details on paper that can be used for a PictBridge compliant device, refer to the on-screen
manual:
Advanced Guide
1.
Set the Front Tray in the front paper feeding position.
Gently press the upper center of the Front Tray to open it.
(1)
Tilt the Front Tray upward.
(2)
Lift the Front Tray until it stops.
(3)
The
Front Feed button lights.
While keeping the Front Tray lifted, tilt the Front Tray forward to set it in the front
(4)
Loading Paper
> Loading Paper in the Front Tray
Notes on Loading Paper .
.
Advanced Guide Troubleshooting
Page 37 of 541 pages