Canon Pro9500 Mark II Series On-Screen Manual page 337

Attaching/Removing the CD-R Tray
> Printing on DVD/CDs
Advanced Guide
Attaching/Removing the CD-R Tray
Attaching the CD-R Tray
1.
Gently press the
the Inner Cover (B).
Note
The Inner Cover does not open when the Front Tray is set in the Front paper feeding
position. Return the Front Tray to the normal printing position before opening the Inner
Cover.
2.
Place the DVD/CD on the CD-R Tray.
Important
Make sure that there is no dirt on the CD-R Tray before placing a DVD/CD on the CD-R
Tray.
When placing a DVD/CD on the CD-R Tray, do not touch the printing surface of the disc
or the reflectors (C) on the CD-R Tray.
When printing on an 8 cm DVD/CD, attach the supplied 8 cm CD-R Adapter. If you do not,
print quality will be reduced and the disc may become damaged.
12 cm DVD/CD:
1. Place the disc on the CD-R Tray with the printable surface facing up.
Do not touch the reflectors (C).
8 cm DVD/CD:
1. Align the protrusions on both edge of the 8 cm CD-R Adapter with indentations on
the CD-R Tray.
> Printing on the Label Side of DVD/CDs
mark on the Front Tray to open the Front Tray (A), then open
> Attaching/Removing the CD-R Tray
Page 337 of 541 pages