Canon Pro9500 Mark II Series On-Screen Manual page 71

Aligning the Print Head
Note
If the automatic adjustment of the print head position has failed, the
Refer to "Eleven flashes:" of "Alarm Lamp Flashes Orange" in "
screen manual: Advanced Guide .
If the print results are still not satisfactory after adjusting the print head position as described
above, align the Print Head manually.
Refer to the on-screen manual:
1.
Make sure that the power is turned on.
2.
Load two sheets of A4 or Letter-sized plain paper in the Rear Tray.
Important
You cannot feed paper from the Front Tray for aligning the Print Head. Load paper in the Rear
Tray.
3.
Open the Front Tray gently, and pull out the Front Tray Extension.
Gently press the upper center of the Front Tray to open it.
Important
If the Inner Cover is open, close it.
4.
Open the Canon IJ Printer Utility dialog box.
Opening the Canon IJ Printer Utility (Macintosh)
See
5.
Adjust the print head position.
Select Test Print in the pop-up menu.
(1)
.
Advanced Guide
.
Alarm lamp flashes.
Troubleshooting " of the on-
Page 71 of 541 pages