Pattern - Canon Pro9500 Mark II Series On-Screen Manual

Cleaning the Print Head
Select the ink group to clean.
(3)
Note
If there are horizontal white streaks in the nozzle check pattern of MBK, PBK, GY, PC, or
PM, select Group 1. If there are horizontal white streaks in the nozzle check pattern of R,
G, C, M, or Y, select Group 2.
For details on the nozzle check pattern, see
Click Execute.
(4)
The printer starts cleaning the Print Head when the
Do not perform any other operations until the printer completes the cleaning of the Print Head. This takes
about 2 minutes.
Note
Clicking Initial Check Items displays the items to be checked before cleaning the Print Head.
Confirm the displayed message, and click Print Check Pattern.
(5)
The nozzle check pattern will be printed.
Do not perform any other operations until the printer completes the printing of the nozzle check pattern.
6.
Check the printed nozzle check pattern.
Examining the Nozzle Check Pattern
See
Note
If the problem is not resolved after cleaning the Print Head twice, clean the Print Head deeply.
Cleaning the Print Head Deeply
See
If you click Cleaning on the Pattern Check dialog box that appears after printing the nozzle check pattern,
the printer starts cleaning the Print Head. Load a sheet of A4 or Letter-sized plain paper in the Rear Tray,
then go to (3) in step 5.
1.
Make sure that the power is turned on.
Examining the Nozzle Check Pattern
Power lamp starts flashing blue.
.
.
Page 62 of 541 pages
.